Nordfab In-line Spark Trap

Nordfab In-line Spark Trap

Installed in ducting as part of a dust collection system, the Nordfab In-line Spark Trap greatly reduces the possibility of fire in cyclones / collectors by decreasing the number of sparks which could reach the cyclone or collector through the ductwork.

See video of Spark Trap in operation

No moving parts and no power required for operation. Minimal pressure loss.

Can quickly and easily be mounted into Quick-Fit ducting systems, or other duct systems with use of a Nordfab adapter, and the trap can easily be removed for cleanout. Available with flanged ends.

Calibration or other assistance from a factory technician is not required.

This is a simple, low-cost tool that can reduce incidents of fire events, reducing costs and disruption and improving safety. System redundancy and complementary measures should be applied.

Download the Nordfab In-line Spark Trap brochure

Download the Nordfab In-line Spark Trap Technical Data sheet

 

Product Description

In-line Spark Trap
Ø mm Item no.

QF / Flanged

Pressure loss in Pa at 15 m/s Height
mm
Width mm Weight
kg
100 55010100 / 55020100 212 180 466 2.8
125 55010125 / 55020125 212 224 504 3.2
160 55010160 / 55020160 224 280 546 3.7
200 55010200 / 55020200 274 350 606 5.0
250 55010250 / 55020250 299 400 606 5.9
315 55010315 / 55020315 336 500 676 6.8
400 55010400 / 55020400 361 630 766 7.3
450 55010450 / 55020450 299 710 826 15.0
500 55010500 / 55020500 311 810 926 21.0
560 55010560 / 55020560 300 920 1026 26.0
630 55010630 / 55020630 315 1020 1086 33.0
710 55010710 / 55020710 320 1150 1186 39.0